banner_page

LMC6484IM

4 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 3V~15.5V ±1.5V~7.75V LMC6484 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6484IM
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 972
  • Description: 4 Channels 30mA per Channel 0.02pA 65 dB Instrumentational OP Amps 3V~15.5V ±1.5V~7.75V LMC6484 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status NRND (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number LMC6484
Pin Count 14
Output Type Rail-to-Rail
Power Supplies 3/15V
Number of Channels 4
Operating Supply Current 2.6mA
Nominal Supply Current 2.6mA
Output Current 30mA
Max Supply Current 2.8mA
Slew Rate 1.3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.02pA
Voltage - Supply, Single/Dual (±) 3V~15.5V ±1.5V~7.75V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 3mV
Bandwidth 1MHz
Gain Bandwidth Product 1.5MHz
Unity Gain BW-Nom 1500 kHz
Voltage Gain 116.47dB
Power Supply Rejection Ratio (PSRR) 65dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 8V
Voltage - Input Offset 110μV
Low-Bias YES
Micropower NO
Programmable Power NO
Input Offset Current-Max (IIO) 0.000002μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC6484IM Overview


Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 14. The pins on this board total to 14 in total. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 14 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 2.6mA . It is recommended to keep the voltage gain at 116.47dB at all times. There are 4 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.

LMC6484IM Features


14 Pins
supply voltage of 5V
116.47dB voltage gain
Output Type: Rail-to-Rail

LMC6484IM Applications


There are a lot of Texas Instruments LMC6484IM Instrumentational OP Amps applications.

  • Communication
  • Measurements of Wheatstone bridge
  • Car stereo
  • Proportional operation circuits
  • Signal amplification
  • Test equipment
  • Band-pass filter
  • High input resistance broadband
  • Industrial control system
  • Video conversion and routing

Write a review

Note: HTML is not translated!
    Bad           Good