LMC660AIN/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMC660 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/15V |
| Number of Channels | 4 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 40mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.002pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~15.5V ±2.38V~7.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.4MHz |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000002μA |
| Height | 5.33mm |
| Length | 19.177mm |
| Width | 6.35mm |
| Thickness | 3.429mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC660AIN/NOPB Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. There have been a total of 14 terminations over the past year. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 1mV. The mounting type that is recommended for this electrical part is Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 1.5mA supply current, this operational amplifier ics can be operated. Maintain 126.02dB as the voltage gain. Op amp ic has 4 channels. On the output type, there are Rail-to-Rail different types of op amps.
LMC660AIN/NOPB Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC660AIN/NOPB Applications
There are a lot of Texas Instruments LMC660AIN/NOPB Instrumentational OP Amps applications.
- ECG equipment
- Cinema or auditorium audio system
- Thermocouples
- Power transmission
- Exponential operation circuits
- Polarized electrodes
- Inverse/same-phase proportional circuit
- Micro signal measurement
- Comparator
- Displayers for aircraft and air transportation control systems
