Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Weight |
9.071847g |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
LMC660 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Power Supplies |
5/15V |
Number of Channels |
4 |
Number of Circuits |
4 |
Nominal Supply Current |
1.5mA |
Output Current |
40mA |
Slew Rate |
1.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
63 dB |
Current - Input Bias |
0.002pA |
Voltage - Supply, Single/Dual (±) |
4.75V~15.5V ±2.38V~7.75V |
Output Current per Channel |
40mA |
Input Offset Voltage (Vos) |
6.3mV |
Bandwidth |
1.4MHz |
Unity Gain BW-Nom |
1400 kHz |
Voltage Gain |
126.02dB |
Average Bias Current-Max (IIB) |
0.000002μA |
Power Supply Rejection Ratio (PSRR) |
63dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
1mV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000002μA |
Programmable Power |
NO |
Input Offset Current-Max (IIO) |
0.000001μA |
Height |
5.33mm |
Length |
19.177mm |
Width |
6.35mm |
Thickness |
3.429mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMC660CN/NOPB Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. The number of terminations approaches 14. It consists of a total of 14 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are included on the operational amplifiers. The input offset voltage is 6.3mV. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . 126.02dB should be the voltage gain. A linear amplifier like this has 4 circuits on it. There are 4 channels on the operational amplifiers. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
LMC660CN/NOPB Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC660CN/NOPB Applications
There are a lot of Texas Instruments LMC660CN/NOPB Instrumentational OP Amps applications.
- Voltage regulation circuit
- Hand-held batteries
- Home audio systems
- Car stereo
- RF cable systems
- Mobile phone
- Video data acquisition
- Fission chambers
- Signal operation
- earphone