banner_page

LMC662CMX

40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LMC662 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC662CMX
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 909
  • Description: 40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LMC662 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status NRND (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e0
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC662
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Power Supplies 5/15V
Operating Supply Current 750μA
Nominal Supply Current 750μA
Output Current 40mA
Slew Rate 1.1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 63 dB
Current - Input Bias 0.002pA
Voltage - Supply, Single/Dual (±) 4.75V~15.5V ±2.38V~7.75V
Output Current per Channel 40mA
Input Offset Voltage (Vos) 1mV
Gain Bandwidth Product 1.4MHz
Unity Gain BW-Nom 1400 kHz
Voltage Gain 126.02dB
Power Supply Rejection Ratio (PSRR) 63dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16V
Low-Bias YES
Micropower YES
Programmable Power NO
Wideband NO
Input Offset Current-Max (IIO) 0.000001μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC662CMX Overview


Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 750μA can be used to operate this linear amplifier. It is a member of the 126.02dB's 126.02dB family. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 2 elements in this buffer amplifier. To pack the operational amplifier ics, TR is adopted as the packing method.

LMC662CMX Features


8 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail

LMC662CMX Applications


There are a lot of Texas Instruments LMC662CMX Instrumentational OP Amps applications.

  • E-book readers
  • Fission chambers
  • RF cable systems
  • Test equipment
  • Non-polarized electrodes
  • Tablets
  • Switching amplifier
  • High-frequency data acquisition systems
  • Home audio systems
  • Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good