LMC662CMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC662 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 750μA |
| Output Current | 40mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.002pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~15.5V ±2.38V~7.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.4MHz |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC662CMX/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureA supply current of 750μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 126.02dB at all times. Op amp ic has 2 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As a result of this, the buffer amplifier is packed in TR.
LMC662CMX/NOPB Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
LMC662CMX/NOPB Applications
There are a lot of Texas Instruments LMC662CMX/NOPB Instrumentational OP Amps applications.
- Fission chambers
- Displayers for aircraft and air transportation control systems
- Scintillation detectors
- Tablets
- Signal filtering
- Ultrasound transducers
- High input resistance broadband
- Logarithmic operation circuits
- Vehicle electronics
- Band-pass filter
