LMC662CN/NOPB

2 Channels 40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LMC662 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMC662CN/NOPB
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 773
Description: 2 Channels 40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LMC662 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	4.535924g
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMC662
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	5/15V
Number of Channels	2
Operating Supply Current	750μA
Nominal Supply Current	750μA
Output Current	40mA
Slew Rate	1.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	0.002pA
Voltage - Supply, Single/Dual (±)	4.75V~15.5V ±2.38V~7.75V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	1mV
Bandwidth	1.4MHz
Unity Gain BW-Nom	1400 kHz
Voltage Gain	126.02dB
Power Supply Rejection Ratio (PSRR)	63dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000001μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC662CN/NOPB Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp rates 1mV as input offset voltage. The mounting type that is recommended for this electrical part is Through Hole. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 750μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 126.02dB. On the buffer amps, there are 2 channels that can be used. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.