banner_page

LMC6762AIM

Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40 fA pA 20μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6762AIM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 643
  • Description: Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40 fA pA 20μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC6762
Pin Count 8
Output Type Push-Pull, Rail-to-Rail
Number of Circuits 2
Nominal Supply Current 20μA
Output Current 30mA
Max Supply Current 20μA
Propagation Delay 10 μs
Quiescent Current 20μA
Response Time 4000 ns
Common Mode Rejection Ratio 75 dB
Voltage - Supply, Single/Dual (±) 2.7V~15V ±1.35V~7.5V
Input Offset Voltage (Vos) 5mV
Voltage Gain 100dB
Average Bias Current-Max (IIB) 4e-7μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 16V
Input Bias Current 40 fA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 0.04pA @ 5V
CMRR, PSRR (Typ) 75dB CMRR, 80dB PSRR
Current - Output (Typ) 30mA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC6762AIM Overview


To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .Output type Push-Pull, Rail-to-Rail is used for this comparator.This device is designed in Tube case.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type General Purpose .There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.This comparator has 8 pins.Try search LMC6762 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 20μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 20μA for normal use.If the current supply exceeds 20μA , the comparator could malfunction.A voltage gain of 100dB can be determined from the voltage formula for the part.

LMC6762AIM Features


Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB

LMC6762AIM Applications


There are a lot of Texas Instruments LMC6762AIM linear comparators applications.

  • Wireless Base Stations
  • Self-diagnostics
  • Wide Range VCO; MOS Clock Timers
  • Laptop Computers
  • Handheld Instruments
  • Factory automation & control
  • Motor drives
  • Ultra-Low Power Systems
  • Battery-Powered Electronics
  • Portable Battery Monitoring

Write a review

Note: HTML is not translated!
    Bad           Good