banner_page

LMC6762AIM/NOPB

Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40pA pA 20μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6762AIM/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 669
  • Description: Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40pA pA 20μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC6762
Pin Count 8
Output Type Push-Pull, Rail-to-Rail
Number of Circuits 2
Nominal Supply Current 20μA
Output Current 30mA
Max Supply Current 20μA
Propagation Delay 10 μs
Quiescent Current 20μA
Response Time 4000 ns
Common Mode Rejection Ratio 75 dB
Voltage - Supply, Single/Dual (±) 2.7V~15V ±1.35V~7.5V
Input Offset Voltage (Vos) 5mV
Voltage Gain 100dB
Average Bias Current-Max (IIB) 4e-7μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 16V
Max Input Current 40 fA
Dual Supply Voltage 15V
Input Bias Current 40pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 0.04pA @ 5V
CMRR, PSRR (Typ) 75dB CMRR, 80dB PSRR
Current - Output (Typ) 30mA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMC6762AIM/NOPB Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type Push-Pull, Rail-to-Rail is used for this comparator.The chip is packaged with Tube .There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .8 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LMC6762 .The comparator presents a quiescent current of 20μA volts.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 20μA in order to use the device normally.Current supply exceeding 20μA could cause disfunction of the compartator.Input current to the device is limited to 40 fA .According to the voltage formula, the part has a voltage gain of 100dB .

LMC6762AIM/NOPB Features


Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB

LMC6762AIM/NOPB Applications


There are a lot of Texas Instruments LMC6762AIM/NOPB linear comparators applications.

  • Mobile Phones
  • Analog front end
  • Appliances
  • Wide Range VCO; MOS Clock Timers
  • Metering Systems
  • Mobile Communications
  • Self-diagnostics
  • Infotainment & cluster
  • Portable and Battery-Powered Systems
  • Power Supervision

Write a review

Note: HTML is not translated!
    Bad           Good