LMC6762AIMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6762 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6762AIMX Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.This comparator is of the Push-Pull, Rail-to-Rail output type.As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.A total of 2 elements can be found in it.The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for LMC6762 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 20μA .The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 20μA for normal use.The compartator could be damaged if the current supply exceeds 20μA .Input current to the device is limited to 40 fA .Based on the voltage formula, the voltage gain of the part is 100dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMC6762AIMX Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6762AIMX Applications
There are a lot of Texas Instruments LMC6762AIMX linear comparators applications.
- Industrial
- Security Detection Systems
- Set Top Boxes
- High-Speed Differential Line Receiver
- Portable and Battery-Powered Systems
- Wearable Devices
- Lithium ion battery monitoring
- High-Speed Sampling Circuits
- Power Supervision
- System control and monitoring
