LMC6762BIM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6762 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6762BIM Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type Push-Pull, Rail-to-Rail output on this device.As a result, it is designed with Tube package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LMC6762 .This comparator presents a quiescent current of 20μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 20μA .If the current supply exceeds 20μA , the comparator might be damaged.The voltage gain of the part is indicated by 100dB in the voltage formula.The operating supply voltage for normal operation should be 15V .
LMC6762BIM Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6762BIM Applications
There are a lot of Texas Instruments LMC6762BIM linear comparators applications.
- Mobile Phones
- Power Supervision
- High-Speed Differential Line Receiver
- Window Comparators
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- Limit Comparators
- Automatic Test Equipment
- Hand-Held Electronics
- Mobile Phones and Tablets
