LMC6762BIM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6762 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 12V |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 12μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6762BIM/NOPB Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a type Push-Pull, Rail-to-Rail output.This chip is designed with the Tube package.As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a General Purpose chip.The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LMC6762 .As a result, this comparator displays a quiescent current of 12μA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 20μA .An excess of current supply over 20μA could result in malfunction of the comparator.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .Comparator electronics is necessary to have a voltage of 12V for normal operation.
LMC6762BIM/NOPB Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 12μA
Voltage Gain: 100dB
LMC6762BIM/NOPB Applications
There are a lot of Texas Instruments LMC6762BIM/NOPB linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Point of load regulators
- Metering Systems
- Mobile Phones
- Automotive
- Notebooks and PDAs
- Portable Battery Monitoring
- Factory automation & control
- Industrial
- Current and voltage sensing
