LMC6762BIMX
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6762 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
LMC6762BIMX Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Push-Pull, Rail-to-Rail .As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You may wish to search LMC6762 for more solutions that address your specific needs.There is a quiescent current of 20μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 20μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .A maximum current of 40 fA can be supplied to the device.A voltage gain of 100dB can be determined from the voltage formula for the part.Comparator electronics is acceptable to pack the device by TR .
LMC6762BIMX Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6762BIMX Applications
There are a lot of Texas Instruments LMC6762BIMX linear comparators applications.
- Zero-Crossing Detectors
- Battery management and protection
- Wide Range VCO; MOS Clock Timers
- Multivibrators and High-Voltage Digital Logic Gates
- General Purpose Low Voltage Applications
- Industrial
- Battery-Powered Electronics
- RC Timers
- Building automation
- DC/DC and AC/DC power supplies
