banner_page

LMC6772AIM

Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40 fA pA 20μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6772AIM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 510
  • Description: Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40 fA pA 20μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC6772
Pin Count 8
Output Type Open Drain
Number of Circuits 2
Nominal Supply Current 20μA
Output Current 30mA
Max Supply Current 20μA
Propagation Delay 10 μs
Quiescent Current 20μA
Response Time 4000 ns
Common Mode Rejection Ratio 75 dB
Voltage - Supply, Single/Dual (±) 2.7V~15V ±1.35V~7.5V
Input Offset Voltage (Vos) 5mV
Voltage Gain 100dB
Average Bias Current-Max (IIB) 4e-7μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 16V
Max Input Current 40 fA
Input Bias Current 40 fA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 0.04pA @ 5V
CMRR, PSRR (Typ) 75dB CMRR, 80dB PSRR
Current - Output (Typ) 30mA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC6772AIM Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.This chip is designed with the Tube package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.8 pins are present on the comparator.You may wish to search LMC6772 for more solutions that address your specific needs.The comparator presents a quiescent current of 20μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 20μA when using the device.A current supply greater than 20μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 40 fA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .

LMC6772AIM Features


Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB

LMC6772AIM Applications


There are a lot of Texas Instruments LMC6772AIM linear comparators applications.

  • Automatic Test Equipment
  • Window Comparators
  • Pulse, Squarewave, and Time Delay Generators
  • Wearable Devices
  • RC Timers
  • General-Purpose Portable Devices
  • Power Supervision
  • Mobile Phones and Tablets
  • Infotainment and Clusters
  • Window Comparators, Multivibrators

Write a review

Note: HTML is not translated!
    Bad           Good