LMC6772AIMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMC6772 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC6772AIMM Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.This comparator is of the Open Drain output type.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator has 8 pins.The type of mounting recommended is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LMC6772 .This comparator presents a quiescent current of 20μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 20μA .The compartator could be damaged if the current supply exceeds 20μA .The maximal current your can input into the device is 40 fA .A voltage gain of 100dB can be determined from the voltage formula for the part.Normal operation requires 15V operating supply voltage.The device is packaged in TR and is often used in ADC circuits.
LMC6772AIMM Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772AIMM Applications
There are a lot of Texas Instruments LMC6772AIMM linear comparators applications.
- DC/DC and AC/DC power supplies
- Ultra-Low Power Systems
- Analog front end
- System control and monitoring
- Lithium ion battery monitoring
- Limit Comparators
- Body Control Modules
- Battery management and protection
- Factory automation & control
- Handheld Instruments
