LMC6772AIMMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMC6772 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6772AIMMX/NOPB Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.This comparator is of the Open Drain output type.We ship the part through Tape & Reel (TR) .There are8 terminals on the comparator.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.A total of 2 elements can be found in it.The device contains 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.8 pins are available on the comparator.You may wish to search LMC6772 for more solutions that address your specific needs.This comparator presents a quiescent current of 20μA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .You are allowed to input a maximum current of 40 fA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .This device is usually used in ADC circuits (packaged in TR ).
LMC6772AIMMX/NOPB Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772AIMMX/NOPB Applications
There are a lot of Texas Instruments LMC6772AIMMX/NOPB linear comparators applications.
- Ultra-Low Power Systems
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Alarm and Monitoring Circuits
- Mobile Communications
- Limit Comparators
- Handheld Instruments
- Security Detection Systems
- Mobile Phones
