Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LMC6772 |
Pin Count |
8 |
Output Type |
Open Drain |
Number of Elements |
2 |
Nominal Supply Current |
20μA |
Output Current |
30mA |
Max Supply Current |
20μA |
Propagation Delay |
10 μs |
Quiescent Current |
20μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V ±1.35V~7.5V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
16V |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMC6772AIMX Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.A total of 2 elements can be found in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LMC6772 .As a result, this comparator displays a quiescent current of 20μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .If the current supply exceeds 20μA , the comparator might be damaged.Electronic comparator is possible to input up to 40 fA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .
LMC6772AIMX Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772AIMX Applications
There are a lot of Texas Instruments LMC6772AIMX linear comparators applications.
- Automotive
- Threshold Detectors
- General-Purpose Portable Devices
- Power Supervision
- Portable Battery Monitoring
- Mobile Phones
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- General-Purpose, Low-Voltage Applications