banner_page

LMC6772BIM

Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40pA pA 20μA μA 15mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMC6772BIM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 897
  • Description: Surface Mount Tube 30mA mA 4000 ns μs Linear Comparators 100dB dB 40pA pA 20μA μA 15mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 2
Supply Voltage 5V
Base Part Number LMC6772
Pin Count 8
Output Type Open Drain
Number of Circuits 2
Nominal Supply Current 20μA
Output Current 30mA
Max Supply Current 20μA
Propagation Delay 10 μs
Quiescent Current 20μA
Response Time 4000 ns
Common Mode Rejection Ratio 75 dB
Voltage - Supply, Single/Dual (±) 2.7V~15V ±1.35V~7.5V
Input Offset Voltage (Vos) 15mV
Voltage Gain 100dB
Average Bias Current-Max (IIB) 4e-7μA
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 16V
Max Input Current 40 fA
Input Bias Current 40pA
Voltage - Input Offset (Max) 15mV @ 5V
Current - Input Bias (Max) 0.04pA @ 5V
CMRR, PSRR (Typ) 75dB CMRR, 80dB PSRR
Current - Output (Typ) 30mA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC6772BIM Overview


The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a Open Drain output is used here.As a result, it is designed with Tube package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .There are 8 pins on this board.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are present on the comparator.You can find more pin-to-pin solutions by searching LMC6772 .The comparator presents a quiescent current of 20μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 20μA when using the device.A supply current exceeding 20μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 40 fA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .

LMC6772BIM Features


Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB

LMC6772BIM Applications


There are a lot of Texas Instruments LMC6772BIM linear comparators applications.

  • Pulse, Squarewave, and Time Delay Generators
  • Simple Analog-to-Digital Converters (ADCs)
  • Infotainment and Clusters
  • Current and voltage sensing
  • Metering Systems
  • Limit Comparators
  • Security Detection Systems
  • Infotainment & cluster
  • Lithium ion battery monitoring
  • Zero-Crossing Detectors

Write a review

Note: HTML is not translated!
    Bad           Good