Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LMC6772 |
Pin Count |
8 |
Output Type |
Open Drain |
Number of Elements |
2 |
Nominal Supply Current |
20μA |
Output Current |
30mA |
Max Supply Current |
20μA |
Propagation Delay |
10 μs |
Quiescent Current |
20μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V ±1.35V~7.5V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
16V |
Input Bias Current |
40 fA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMC6772BIN Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type Open Drain output on this device.The chip is packaged with Tube .The device is designed with 8 terminations.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .This element consists of 2 elements in total.A total of 8 pins are included.A Through Hole mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LMC6772 .A quiescent current of 20μA is observed in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .A current supply greater than 20μA may cause the comparator to malfunction.In accordance with the voltage formula, the part's voltage gain is 100dB .
LMC6772BIN Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772BIN Applications
There are a lot of Texas Instruments LMC6772BIN linear comparators applications.
- Laptop Computers
- Point of load regulators
- RC Timers
- System control and monitoring
- Building automation
- Mobile Communications
- Automotive
- Ultra-Low Power Systems
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications