LMC6772QMM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMC6772 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6772QMM/NOPB Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the Open Drain output type.As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.When it comes to types, this comparator is a typical General Purpose .A total of 2 elements can be found in it.There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search LMC6772 for more pin-to-pin solutions.This comparator presents a quiescent current of 20μA .A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 20μA .A current supply greater than 20μA may cause the comparator to malfunction.The maximal current your can input into the device is 40 fA .The voltage gain of the part is indicated by 100dB in the voltage formula.This part is from the Automotive, AEC-Q100 comparator series.Comparator electronics is acceptable to pack the device by TR .
LMC6772QMM/NOPB Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772QMM/NOPB Applications
There are a lot of Texas Instruments LMC6772QMM/NOPB linear comparators applications.
- Portable Battery Monitoring
- Metering Systems
- Consumer Medical Electronics
- Laptop Computers
- Window Comparators, Multivibrators
- RC Timers
- Industrial
- Threshold Detectors
- System control and monitoring
- High-Speed Differential Line Receiver
