LMC6772QMMX/NOPB
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMC6772 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
LMC6772QMMX/NOPB Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has an output type of Open Drain .We ship the part through Tape & Reel (TR) .The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 8 pins.You can search LMC6772 if you are looking for more pin-to-pin solutions.A quiescent current of 20μA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .The compartator could be damaged if the current supply exceeds 20μA .Input current to the device cannot exceed 40 fA .Based on the voltage formula, the voltage gain of the part is 100dB .A comparator part from the Automotive, AEC-Q100 series is used in this part.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMC6772QMMX/NOPB Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772QMMX/NOPB Applications
There are a lot of Texas Instruments LMC6772QMMX/NOPB linear comparators applications.
- Motor drives
- Wide Range VCO; MOS Clock Timers
- Appliances
- Portable and Battery-Powered Systems
- Handheld Instruments
- RC Timers
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- Automotive
- Ultra-Low Power Systems
