LMC7101AIM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMC7101 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Output Current | 24mA |
| Max Supply Current | 850μA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~15.5V ±1.35V~7.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 110μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 110.63dB |
| Average Bias Current-Max (IIB) | 0.000064μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000064μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000032μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7101AIM5/NOPB Overview
Op amp is packaged in SC-74A, SOT-753 case. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. It consists of a total of 5 pins in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 110μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 800μA, this op amp ic can operate. The voltage gain should stay at 110.63dB. 1 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 12V voltage. This linear amplifier pack is based on the TR axis.
LMC7101AIM5/NOPB Features
5 Pins
supply voltage of 3V
110.63dB voltage gain
Output Type: Rail-to-Rail
LMC7101AIM5/NOPB Applications
There are a lot of Texas Instruments LMC7101AIM5/NOPB Instrumentational OP Amps applications.
- Mobile phone
- Gaming industry
- High/low-pass filter circuit
- Portable docking station
- Information processing
- Band-pass filter
- High gain DC amplifier
- Radar
- Hand-held batteries
- Displayers for aircraft and air transportation control systems
