LMC7101AIM5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMC7101 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 500μA |
| Output Current | 24mA |
| Current - Supply | 800μA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~15.5V ±1.35V~7.75V |
| Input Offset Voltage (Vos) | 110μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 110.63dB |
| Average Bias Current-Max (IIB) | 0.000064μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000064μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000032μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7101AIM5X/NOPB Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. Buffer amplifier has a total of 5 pins. This linear amplifier should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 5 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 110μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. You should keep the voltage gain at 110.63dB for the time being. There are 1 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To pack the operational amplifier ics, TR is adopted as the packing method. It is recommended that this electronic component be used with an 800μA supply.
LMC7101AIM5X/NOPB Features
5 Pins
supply voltage of 3V
110.63dB voltage gain
Output Type: Rail-to-Rail
LMC7101AIM5X/NOPB Applications
There are a lot of Texas Instruments LMC7101AIM5X/NOPB Instrumentational OP Amps applications.
- Automotive sensors
- Biopotential
- Signal filtering
- Portable docking station
- High/low-pass filter circuit
- Vehicle electronics
- Medical imaging
- Signal operation
- Communication
- Hand-held batteries
