LMC7101QM5/NOPB
| Parameters | |
|---|---|
| Base Part Number | LMC7101 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Output Current | 50mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~15.5V ±1.35V~7.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 110μV |
| Bandwidth | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 110.63dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
LMC7101QM5/NOPB Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 5 terminations over the past year. In total, there are 5 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 5 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 110μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 800μA . You should keep the voltage gain at 110.63dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. This linear amplifier has a total of 1 elements. The linear amplifier is packaged by using a TR axis. This buffer amplifier is assigned within the Automotive, AEC-Q100 series by its manufacturer.
LMC7101QM5/NOPB Features
5 Pins
supply voltage of 3V
110.63dB voltage gain
Output Type: Rail-to-Rail
LMC7101QM5/NOPB Applications
There are a lot of Texas Instruments LMC7101QM5/NOPB Instrumentational OP Amps applications.
- Commercial audio systems
- Semiconductor detectors
- Medical imaging
- Signal amplification
- Exponential operation circuits
- Power generator
- earphone
- Communication
- E-book readers
- pH (acidity)
