LMC7111BIM5
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7111 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Output Current | 7mA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 50kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7111BIM5 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. A total of 5 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. It should be noted that this op amp is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 900μV voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 25μA . There should be no change in the voltage gain at 113.98dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. This linear amplifier pack is based on the TR axis.
LMC7111BIM5 Features
5 Pins
supply voltage of 2.7V
113.98dB voltage gain
Output Type: Rail-to-Rail
LMC7111BIM5 Applications
There are a lot of Texas Instruments LMC7111BIM5 Instrumentational OP Amps applications.
- Laptop
- Band-stop filter
- Displayers for aircraft and air transportation control systems
- Differentiator circuits
- Voltage regulation circuit
- Scintillation detectors
- Subtraction operation circuits
- Non-polarized electrodes
- Television broadcasting equipment
- High/low-pass filter circuit
