LMC7111BIM5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7111 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Output Current | 7mA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 40 kHz |
| Gain Bandwidth Product | 50kHz |
| Unity Gain BW-Nom | 50 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7111BIM5X/NOPB Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 5. A total of 5 pins are located on this board. Please take in mind that op amp should be run at 2.7V. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are located on the operational amplifiers. There is an input offset voltage of 900μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 25μA . There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted.
LMC7111BIM5X/NOPB Features
5 Pins
supply voltage of 2.7V
113.98dB voltage gain
Output Type: Rail-to-Rail
LMC7111BIM5X/NOPB Applications
There are a lot of Texas Instruments LMC7111BIM5X/NOPB Instrumentational OP Amps applications.
- Computer workstations
- Television
- Gaming industry
- Comparator
- Home audio systems
- Division circuits
- Proportional counter tubes
- Radar
- Measurements of Wheatstone bridge
- Ultrasound transducers
