LMC7211AIM5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 30A |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Circuits | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Neg Supply Voltage-Max (Vsup) | -8V |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 30mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7211AIM5 Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.A comparator with an output type of Push-Pull is being used.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has5 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has 5 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 5 pins.You can search LMC7211 if you are looking for more pin-to-pin solutions.There is a quiescent current of 14μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 14μA for normal use.If the current supply exceeds 14μA , the comparator might be damaged.There is a maximum current that can be input into the device of 40 fA .According to the voltage formula, the part has a voltage gain of 100dB .Comparator electronics is acceptable to pack the device by TR .
LMC7211AIM5 Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211AIM5 Applications
There are a lot of Texas Instruments LMC7211AIM5 linear comparators applications.
- Power management
- Limit Comparators
- Laptop Computers
- Window Comparators
- Hand-Held Electronics
- Mobile Phones and Tablets
- Window Comparators, Multivibrators
- Threshold Detectors
- Current and voltage sensing
- High-Speed Differential Line Receiver
