LMC7211AIM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 30A |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 12V |
| Number of Circuits | 1 |
| Operating Supply Current | 14μA |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 4 μs |
| Quiescent Current | 7μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| -3db Bandwidth | 1.6MHz |
| Max Input Current | 40 fA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 40pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 10μs |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7211AIM5/NOPB Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.A comparator with an output type of Push-Pull is being used.The chip is packaged with Cut Tape (CT) .The comparator has 5 terminals.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.Electronic comparator has 5 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator consists of 5 pins.You may wish to search LMC7211 for more solutions that address your specific needs.A quiescent current of 7μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 14μA .Current supply exceeding 14μA could cause disfunction of the compartator.There is a maximum current that can be input into the device of 40 fA .The voltage formula shows that the part has a voltage gain of 100dB .The normal operation of the system requires 12V operating voltage.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMC7211AIM5/NOPB Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 7μA
Voltage Gain: 100dB
LMC7211AIM5/NOPB Applications
There are a lot of Texas Instruments LMC7211AIM5/NOPB linear comparators applications.
- Mobile Phones and Tablets
- Portable Battery Monitoring
- Alarm and Monitoring Circuits
- Point of load regulators
- Self-diagnostics
- Metering Systems
- Set Top Boxes
- DC/DC and AC/DC power supplies
- General-Purpose Portable Devices
- High-Speed Sampling Circuits
