LMC7211AIM5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7211AIM5X Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.Output type Push-Pull is used for this comparator.This device is designed in Tape & Reel (TR) case.There are5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 1 elements.The device includes 5 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 5 .In case you are looking for more pin-to-pin solutions, you may want to search LMC7211 .In this comparator, the quiescent current is 14μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 14μA .A supply current exceeding 14μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 40 fA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.Packed in TR , this device is for general uses (often in ADC circuits).
LMC7211AIM5X Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211AIM5X Applications
There are a lot of Texas Instruments LMC7211AIM5X linear comparators applications.
- DC/DC and AC/DC power supplies
- Handheld Instruments
- Metering Systems
- Consumer Medical Electronics
- Limit Comparators
- Wearable Devices
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Threshold Detectors
- Automatic Test Equipment
