LMC7211AIMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7211 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7211AIMX/NOPB Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Push-Pull is being used.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.The device contains 8 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .8 pins are present on the comparator.You can find more pin-to-pin solutions by searching LMC7211 .In this comparator, the quiescent current is 14μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 14μA supply current.A current supply greater than 14μA may cause the comparator to malfunction.The maximal current your can input into the device is 40 fA .In accordance with the voltage formula, the part's voltage gain is 100dB .Packed in TR , this device is for general uses (often in ADC circuits).
LMC7211AIMX/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211AIMX/NOPB Applications
There are a lot of Texas Instruments LMC7211AIMX/NOPB linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Handheld Instruments
- Notebooks and PDAs
- Battery-Powered Electronics
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- Window Comparators
- Window Comparators, Multivibrators
- RC Timers
