Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
LMC7211 |
Pin Count |
8 |
Output Type |
Push-Pull |
Operating Supply Voltage |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
14μA |
Output Current |
30mA |
Max Supply Current |
14μA |
Propagation Delay |
10 μs |
Quiescent Current |
14μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V ±1.35V~7.5V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
4e-7μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMC7211BIM Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.Electronic comparator is shipped by Tube .As you can see, the comparator has8 terminals.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .You may wish to search LMC7211 for more solutions that address your specific needs.There is 14μA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 14μA .A current supply greater than 14μA may result in the comparator malfunctioning.A maximum current of 40 fA can be supplied to the device.From the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.
LMC7211BIM Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211BIM Applications
There are a lot of Texas Instruments LMC7211BIM linear comparators applications.
- Automatic Test Equipment
- DC/DC and AC/DC power supplies
- Power management
- General Purpose Low Voltage Applications
- Power Supervision
- Mobile Communications
- Laptop Computers
- Pulse, Squarewave, and Time Delay Generators
- Security Detection Systems
- Consumer Medical Electronics