LMC7211BIM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 12V |
| Number of Circuits | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 4 μs |
| Quiescent Current | 7μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| -3db Bandwidth | 1.6MHz |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 10μs |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7211BIM5/NOPB Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.A comparator with a Push-Pull output is used here.Ready for shipping in Cut Tape (CT) package.Electronic comparator is possible to find the 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.The device is equipped with 5 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .5 pins are available on the comparator.You may wish to search LMC7211 for more solutions that address your specific needs.In this comparator, the quiescent current is 7μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current of the device be 14μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 14μA .Input current to the device cannot exceed 40 fA .Comparator electronics follows that the voltage gain of the part is 100dB .The operating supply voltage for normal operation should be 12V .Often found in ADC circuits, this device is packed in TR .
LMC7211BIM5/NOPB Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 7μA
Voltage Gain: 100dB
LMC7211BIM5/NOPB Applications
There are a lot of Texas Instruments LMC7211BIM5/NOPB linear comparators applications.
- Point of load regulators
- High-Speed Differential Line Receiver
- Motor drives
- General-Purpose Portable Devices
- High-Speed Sampling Circuits
- Automatic Test Equipment
- Lithium ion battery monitoring
- General Purpose Low Voltage Applications
- Laptop Computers
- Battery-Powered Electronics
