LMC7211BIM5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 7μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7211BIM5X Overview
A convenient transport package is provided in SC-74A, SOT-753 .Output type Push-Pull is used for this comparator.Ready for shipping in Tape & Reel (TR) package.The comparator has a total of 5 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator has a total of 1 elements.Electronic comparator has 5 pins.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .This comparator has 5 pins.You can find more pin-to-pin solutions by searching LMC7211 .There is 7μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.A current supply greater than 14μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 40 fA into the device.The voltage formula shows that the part has a voltage gain of 100dB .Often found in ADC circuits, this device is packed in TR .
LMC7211BIM5X Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 7μA
Voltage Gain: 100dB
LMC7211BIM5X Applications
There are a lot of Texas Instruments LMC7211BIM5X linear comparators applications.
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Industrial
- Analog front end
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Appliances
- Infotainment & cluster
- Set Top Boxes
- Current and voltage sensing
