LMC7211BIM5X/NOPB
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| -3db Bandwidth | 1.6MHz |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
LMC7211BIM5X/NOPB Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.Output type Push-Pull is used for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 1 elements.The device contains 5 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.5 pins are available on the comparator.Search LMC7211 to find more pin-to-pin solutions.The comparator displays a quiescent current of 14μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 14μA supply current.A supply current exceeding 14μA may result in the comparator malfunctioning.A maximum current of 40 fA can be supplied to the device.In accordance with the voltage formula, the part's voltage gain is 100dB .The device is acceptable to pack by TR .
LMC7211BIM5X/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7211BIM5X/NOPB Applications
There are a lot of Texas Instruments LMC7211BIM5X/NOPB linear comparators applications.
- Battery management and protection
- General Purpose Low Voltage Applications
- Analog front end
- Ultra-Low Power Systems
- Laptop Computers
- Infotainment & cluster
- Mobile Communications
- Automotive
- Threshold Detectors
- Battery-Powered Electronics
