LMC7215IM5/NOPB
| Parameters | |
|---|---|
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Current Rating | 30A |
| Base Part Number | LMC7215 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 24 μs |
| Quiescent Current | 700nA |
| Response Time | 17000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Dual Supply Voltage | 8V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 90dB PSRR |
| Height | 1.45mm |
LMC7215IM5/NOPB Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .A comparator with a Push-Pull output is used here.This chip is designed with the Cut Tape (CT) package.Electronic comparator is possible to find the 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.Electronic comparator includes 5 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator consists of 5 pins.If you require more pin-to-pin solutions, search LMC7215 for more options.This comparator presents a quiescent current of 700nA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 1μA supply current.Current supply exceeding 1μA could cause disfunction of the compartator.Comparator electronics follows that the voltage gain of the part is 140dB .Comparator electronics is necessary to have a voltage of 3V for normal operation.Packed in TR , this device is for general uses (often in ADC circuits).
LMC7215IM5/NOPB Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 700nA
Voltage Gain: 140dB
LMC7215IM5/NOPB Applications
There are a lot of Texas Instruments LMC7215IM5/NOPB linear comparators applications.
- Portable and Battery-Powered Systems
- Point of load regulators
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Multivibrators and High-Voltage Digital Logic Gates
- Set Top Boxes
- Motor drives
- Lithium ion battery monitoring
- Window Comparators, Multivibrators
- RC Timers
