LMC7215IM5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7215 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 24 μs |
| Quiescent Current | 1μA |
| Response Time | 17000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 90dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7215IM5X Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has an output type of Push-Pull .This package has been designed with Tape & Reel (TR) .You can find 5 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator supplied with 2.7V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 1 elements.There are 5 pins on this board.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.5 pins are present on the comparator.You can search LMC7215 if you are looking for more pin-to-pin solutions.A quiescent current of 1μA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 1μA when using the device.An excess of current supply over 1μA could result in malfunction of the comparator.Comparator electronics follows that the voltage gain of the part is 140dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMC7215IM5X Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
Voltage Gain: 140dB
LMC7215IM5X Applications
There are a lot of Texas Instruments LMC7215IM5X linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Self-diagnostics
- Metering Systems
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Wide Range VCO; MOS Clock Timers
- Motor drives
- Infotainment & cluster
- Consumer Medical Electronics
