LMC7215IMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7215 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 24 μs |
| Quiescent Current | 1μA |
| Response Time | 17000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 50 fA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 90dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7215IMX/NOPB Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.This is a 1 element comparator.The device contains 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 8 pins.You may wish to search LMC7215 for more solutions that address your specific needs.There is a quiescent current of 1μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1μA when using the device.If the current supply exceeds 1μA , the comparator could malfunction.In order to run the device, there are only 2.7/5V power supplies required.In accordance with the voltage formula, the part's voltage gain is 140dB .Comparator electronics is acceptable to pack the device by TR .
LMC7215IMX/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
Voltage Gain: 140dB
LMC7215IMX/NOPB Applications
There are a lot of Texas Instruments LMC7215IMX/NOPB linear comparators applications.
- Analog front end
- Portable Battery Monitoring
- General-Purpose Portable Devices
- Automotive
- Factory automation & control
- Point of load regulators
- General Purpose Low Voltage Applications
- Handheld Instruments
- Appliances
- Security Detection Systems
