LMC7221AIM5X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7221AIM5X Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .The comparator has an output type of Open Drain .This device is designed in Tape & Reel (TR) case.You can find 5 terminals of the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.Electronic comparator includes 5 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 5 pins.You can find more pin-to-pin solutions by searching LMC7221 .There is 14μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 14μA .If the current supply exceeds 14μA , the comparator might be damaged.You are allowed to input a maximum current of 40 fA into the device.Based on the voltage formula, the voltage gain of the part is 100dB .
LMC7221AIM5X Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221AIM5X Applications
There are a lot of Texas Instruments LMC7221AIM5X linear comparators applications.
- Battery-Powered Electronics
- Limit Comparators
- Window Comparators
- Handheld Instruments
- Power Supervision
- Metering Systems
- High-Speed Sampling Circuits
- General Purpose Low Voltage Applications
- Factory automation & control
- Wearable Devices
