LMC7221AIM5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7221AIM5X/NOPB Overview
For convenience, it is packaged in SC-74A, SOT-753 .A comparator with a Open Drain output is used here.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 5 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as General Purpose .In total, it contains 1 elements.As a result, it contains 5 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 5 pins.If you require more pin-to-pin solutions, search LMC7221 for more options.There is a quiescent current of 14μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 14μA .A current supply greater than 14μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 40 fA into the device.Comparator electronics follows that the voltage gain of the part is 100dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMC7221AIM5X/NOPB Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221AIM5X/NOPB Applications
There are a lot of Texas Instruments LMC7221AIM5X/NOPB linear comparators applications.
- General Purpose Low Voltage Applications
- RC Timers
- Point of load regulators
- Mobile Phones and Tablets
- Battery-Powered Electronics
- Power Supervision
- Ultra-Low Power Systems
- Metering Systems
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
