Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
LMC7221 |
Pin Count |
8 |
Output Type |
Open Drain |
Number of Circuits |
1 |
Nominal Supply Current |
14μA |
Output Current |
30mA |
Max Supply Current |
14μA |
Propagation Delay |
10 μs |
Quiescent Current |
14μA |
Response Time |
7000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V ±1.35V~7.5V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
4e-7μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Current - Output (Typ) |
30mA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMC7221BIM Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.We ship the part through Tube .The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .There are 8 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.You may wish to search LMC7221 for more solutions that address your specific needs.In this comparator, the quiescent current is 14μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.A supply current exceeding 14μA may result in the comparator malfunctioning.You can input a maximum current of 40 fA into this device.The voltage gain of the part is indicated by 100dB in the voltage formula.
LMC7221BIM Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221BIM Applications
There are a lot of Texas Instruments LMC7221BIM linear comparators applications.
- Portable and Battery-Powered Systems
- Wireless Base Stations
- Automatic Test Equipment
- Zero-Crossing Detectors
- Factory automation & control
- Consumer Medical Electronics
- Notebooks and PDAs
- Battery-Powered Electronics
- Current and voltage sensing
- Hand-Held Electronics