LMC7221BIM5
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Circuits | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 30mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LMC7221BIM5 Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a type Open Drain output.The part will be shipped by Tape & Reel (TR) .The comparator has a total of 5 terminals.Other Comparator like the device play a important role in the industry.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .As a result, it contains 5 pins.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 5 .Try search LMC7221 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 14μA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 14μA .A supply current exceeding 14μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 40 fA .A voltage gain of 100dB can be determined from the voltage formula for the part.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMC7221BIM5 Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221BIM5 Applications
There are a lot of Texas Instruments LMC7221BIM5 linear comparators applications.
- Portable Battery Monitoring
- Metering Systems
- Security Detection Systems
- Window Comparators
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- Automotive
- Current and voltage sensing
- Automatic Test Equipment
- Handheld Instruments
