LMC7221BIM5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Dual Supply Voltage | 15V |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 30mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7221BIM5/NOPB Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.The comparator has an output type of Open Drain .As a result, it is designed with Cut Tape (CT) package.The comparator has a total of 5 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.There are a total of 1 elements in it.The pinout of the component starts from 5 pins it has.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator consists of 5 pins.You can find more pin-to-pin solutions by searching LMC7221 .This comparator presents a quiescent current of 14μA .Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 14μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 7μA .Electronic comparator is possible to input a maximum of 40 fA current into the device.Comparator electronics follows that the voltage gain of the part is 100dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMC7221BIM5/NOPB Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221BIM5/NOPB Applications
There are a lot of Texas Instruments LMC7221BIM5/NOPB linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- High-Speed Sampling Circuits
- Wireless Base Stations
- Point of load regulators
- Self-diagnostics
- Motor drives
- Mobile Communications
- Wide Range VCO; MOS Clock Timers
- General Purpose Low Voltage Applications
