LMC7221BIM5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMC7221 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 14μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 14μA |
| Response Time | 7000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC7221BIM5X/NOPB Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.This comparator is of the Open Drain output type.This device is designed in Tape & Reel (TR) case.5 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 1 elements in it.The device contains 5 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.Search LMC7221 to find more pin-to-pin solutions.There is a quiescent current of 14μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 14μA supply current.An excess of current supply over 14μA could result in malfunction of the comparator.Electronic comparator is possible to input up to 40 fA current into the device.According to the voltage formula, the part has a voltage gain of 100dB .Packed in TR , this device is for general uses (often in ADC circuits).
LMC7221BIM5X/NOPB Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
Voltage Gain: 100dB
LMC7221BIM5X/NOPB Applications
There are a lot of Texas Instruments LMC7221BIM5X/NOPB linear comparators applications.
- Battery management and protection
- Simple Analog-to-Digital Converters (ADCs)
- Hand-Held Electronics
- Infotainment and Clusters
- Wireless Base Stations
- Power Supervision
- Point of load regulators
- Portable and Battery-Powered Systems
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose Portable Devices
