LMC7225IM5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7225 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Number of Circuits | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 29 μs |
| Quiescent Current | 1μA |
| Response Time | 22000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 90dB PSRR |
| Current - Output (Typ) | 30mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7225IM5 Overview
For convenience, it is packaged in SC-74A, SOT-753 .This comparator is of the Open Drain output type.The part will be shipped by Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.The device includes 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.Try search LMC7225 to get more pin-to-pin solutions for your special needs.There is 1μA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 1μA .An excess of current supply over 1μA could result in malfunction of the comparator.A voltage gain of 140dB can be determined from the voltage formula for the part.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMC7225IM5 Features
Open Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
Voltage Gain: 140dB
LMC7225IM5 Applications
There are a lot of Texas Instruments LMC7225IM5 linear comparators applications.
- Automotive
- Consumer Medical Electronics
- Building automation
- Threshold Detectors
- Notebooks and PDAs
- Current and voltage sensing
- Self-diagnostics
- Battery management and protection
- Limit Comparators
- Ultra-Low Power Systems
