LMC8101TP/NOPB
| Parameters | |
|---|---|
| Bias Current-Max (IIB) @25C | 0.000064μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.000032μA |
| Height | 575μm |
| Length | 0m |
| Width | 0m |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMC8101 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 700μA |
| Output Current | 20mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 700μV |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 102.8dB |
| Average Bias Current-Max (IIB) | 0.000064μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
LMC8101TP/NOPB Overview
There is a 8-UFBGA case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp rates 700μV as input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 1.1mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 102.8dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier has a total of 1 elements. The operating supply voltage of the buffer op amp is rated at 5V. It is used TR to pack the op amps.
LMC8101TP/NOPB Features
8 Pins
supply voltage of 5V
102.8dB voltage gain
Output Type: Rail-to-Rail
LMC8101TP/NOPB Applications
There are a lot of Texas Instruments LMC8101TP/NOPB Instrumentational OP Amps applications.
- Signal operation
- Image computer boards
- Integrator circuits
- Industrial applications including automation
- Comparator
- Switching amplifier
- Logarithmic operation circuits
- MP3
- High/low-pass filter circuit
- Digital cameras
