LMD18200T/NOPB
| Parameters | |
|---|---|
| Supply Voltage | 42V |
| Base Part Number | LMD18200 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 55V |
| Number of Channels | 2 |
| Voltage | 55V |
| Interface | Parallel |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Output Configuration | Low Side (2) |
| Logic Function | AND |
| Output Current-Max | 3A |
| Collector Emitter Voltage (VCEO) | 55V |
| Max Collector Current | 3A |
| Voltage - Load | 12V~55V |
| Output Peak Current Limit-Nom | 6A |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 500kHz |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 20.82mm |
| Length | 20.02mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-11 (Formed Leads) |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Max Power Dissipation | 25W |
| Technology | Bi-CMOS, DMOS |
| Voltage - Supply | 12V~55V |
| Terminal Position | ZIG-ZAG |
LMD18200T/NOPB Overview
The package is designed with [0].The part is packged with TO-220-11 (Formed Leads) case.A mounting position of Through Holeis recommended for the part.Fits the component connected to General Purpose.There is a possibility of providing 12V~55Vvolts through the device.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.In this case, the motor type is Brushed DC.There are 11 terminations available on this part.There is the option of applying the voltage to the load at the rate of 12V~55V.Please take in mind that this amplifier should be run at 42V.Its recommended mounting way is Through Hole.LMD18200is the part number that finds it.11pins are present on the device.Continually maintains the output voltage at 55V.This motor type can be recognized as Stepper.The supply current used for its operating is 13mA.A total of 2channels are available.
LMD18200T/NOPB Features
Applications : General Purpose
Load voltage across the chip 12V~55V
base on LMD18200 number
Motor Type classified as Stepper
LMD18200T/NOPB Applications
There are a lot of Texas Instruments LMD18200T/NOPB motor drivers applications.
- Daytime running lights (DRLs)
- Lighting for the ambience of tunability
- Lighting for health and wellbeing
- Dash
- Hidden coves in high-end residential settings
- Horticultural applications
- Running preventive- maintenance diagnostics
- Brake lights
- Accurate LED current matching
- Charge pump circuits
