LMD18400N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Voltage - Supply | 7V~28V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.7mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LMD18400 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 15mA |
| Output Current | 3.75A |
| Quiescent Current | 15mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Turn-Off Delay Time | 2 μs |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3.75A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Drain to Source Resistance | 800mOhm |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Built-in Protections | OVER VOLTAGE; THERMAL; TRANSIENT |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMD18400N Overview
The 20-DIP (0.300, 7.62mm) package provides greater flexibility.The packaging method is indicated by Tube.It's mounted on the way to Through Hole.By using 7V~28V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -25°C~150°C TJ.Non-Inverting is used as its input type.Its configuration starts with 20 terminations.Numerous related parts are available for its base part number LMD18400.A total of 20 pins are available on the device.With a supply voltage of 12V, it is designed to operate.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There are several useful electronic components in this subcategory of Peripheral Drivers.The board has a total of 20 component pins.Mosfet driver is based on a basis of 4 outputs that have been integrated.The output current can be set to 3.75A.When this voltage is produced, it is marked as 5.5V.The operating supply voltage should be set at 12V.Its quiescent current at 15mA refers to the current this part consumes on the condition of not being affected by external factors.
LMD18400N Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
20 pins
Quiescent current of 15mA
LMD18400N Applications
There are a lot of Texas Instruments LMD18400N gate drivers applications.
- Solar inverters
- Industrial Power Supplies
- Commercial and agricultural vehicles (CAV)
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- Motor Controls
- Portable computers
