LMD18400N/NOPB
| Parameters | |
|---|---|
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 2 µs |
| Built-in Protections | OVER VOLTAGE; THERMAL; TRANSIENT |
| Height | 5.08mm |
| Length | 26.073mm |
| Width | 6.604mm |
| Thickness | 3.302mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 5W |
| Technology | CMOS |
| Voltage - Supply | 7V~28V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.7mm |
| Base Part Number | LMD18400 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 15mA |
| Output Current | 3.75A |
| Quiescent Current | 15mA |
| Input Type | Non-Inverting |
| Rise Time | 7μs |
| Fall Time (Typ) | 150 ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Channel Type | Independent |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 3.75A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Drain to Source Resistance | 800mOhm |
LMD18400N/NOPB Overview
There is greater flexibility with the 20-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.Through Hole is mounted in the way of the device.When the supply voltage is 7V~28V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -25°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration is based on 20 terminations.There are numerous related parts listed under its base part number LMD18400.When designing, the device is configured with 20 pins.Mosfet driver is designed specifically to run on 12V volts of power.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.This subcategory of Peripheral Drivers has a number of useful electronic components.The number of component pins is 20.In terms of its basis, there are 4 outputs integrated.The device is capable of delivering a current of 3.75A.Considering its maximum power dissipation, 5W shows its maximum capacity to transfer and conduct power loss without overheating.In this case, the voltage output is 5.5V.During the operation of the system, the voltage of the operating supply should be set to 12V.Its quiescent current at 15mA describes its current consumption when not influenced by external factors.
LMD18400N/NOPB Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
20 pins
Maximum power dissipation of 5W
Quiescent current of 15mA
LMD18400N/NOPB Applications
There are a lot of Texas Instruments LMD18400N/NOPB gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Broadcast equipment
- PCMCIA applications
- A/D drivers
- High frequency line drivers
- Motor Drives
- Isolated switch mode power supplies (SMPS)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
