LME49710MA/NOPB

1 Channels 26mA per Channel 7nA 110 dB Instrumentational OP Amps 0.072μA ±2.5V~17V LME49710 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LME49710MA/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 526
Description: 1 Channels 26mA per Channel 7nA 110 dB Instrumentational OP Amps 0.072μA ±2.5V~17V LME49710 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	RAIL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	LME49710
Pin Count	8
Max Output Current	26mA
Number of Channels	1
Operating Supply Current	4.8mA
Nominal Supply Current	4.8mA
Output Current	26mA
Quiescent Current	4.8mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Audio
Common Mode Rejection Ratio	110 dB
Current - Input Bias	7nA
Voltage - Supply, Single/Dual (±)	±2.5V~17V
Output Current per Channel	26mA
Supply Type	Dual
Input Offset Voltage (Vos)	50μV
Bandwidth	55MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	55000 kHz
Voltage Gain	140dB
Average Bias Current-Max (IIB)	0.072μA
Power Supply Rejection Ratio (PSRR)	110dB
Low-Offset	YES
Frequency Compensation	YES
Settling Time	1.2 μs
Low-Bias	NO
Micropower	NO
Bias Current-Max (IIB) @25C	0.072μA
Programmable Power	NO
Dual Supply Voltage	15V
Load Impedance	2kOhm
Height	1.45mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

LME49710MA/NOPB Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Audio type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 50μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 4.8mA . There should be no change in the voltage gain at 140dB. The op amp ic has 1 channels on it. The linear amplifier is packaged by using a RAIL axis. As a result, linear amplifier's quiescent current is 4.8mA.