LME49713MA/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LME49713 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8.5mA |
| Output Current | 100mA |
| Slew Rate | 1900V/μs |
| Architecture | CURRENT-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 1.8μA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Output Current per Channel | 100mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 132MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 132000 kHz |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LME49713MA/NOPB Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are Audio types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 50μV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 8mA, this op amp ic can operate. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. As a result of this, the buffer amplifier is packed in RAIL.
LME49713MA/NOPB Features
8 Pins
supply voltage of 15V
LME49713MA/NOPB Applications
There are a lot of Texas Instruments LME49713MA/NOPB Instrumentational OP Amps applications.
- Signal transformation
- Weak signal detection
- Oscilloscopes
- High-frequency data acquisition systems
- Broadcasting
- Measurements of Wheatstone bridge
- Video amplifiers
- MP3
- Cinema or auditorium audio system
- Industrial control system
