LME49721MA/NOPB

2 Channels 9.7mA per Channel 0.04pA 70 dB Instrumentational OP Amps 0.000001μA 5V 2.2V~5.5V ±1.1V~2.75V LME49721 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LME49721MA/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 407
Description: 2 Channels 9.7mA per Channel 0.04pA 70 dB Instrumentational OP Amps 0.000001μA 5V 2.2V~5.5V ±1.1V~2.75V LME49721 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	LME49721
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	2
Operating Supply Current	2.15mA
Nominal Supply Current	2.15mA
Output Current	100mA
Slew Rate	8.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Audio
Common Mode Rejection Ratio	70 dB
Current - Input Bias	0.04pA
Voltage - Supply, Single/Dual (±)	2.2V~5.5V ±1.1V~2.75V
Output Current per Channel	9.7mA
Supply Type	Single
Input Offset Voltage (Vos)	300μV
Bandwidth	20MHz
Unity Gain BW-Nom	20000 kHz
Voltage Gain	130dB
Average Bias Current-Max (IIB)	0.000001μA
Power Supply Rejection Ratio (PSRR)	85dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Input Offset Current-Max (IIO)	0.000065μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LME49721MA/NOPB Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a Audio-type. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 300μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2.15mA, this op amp ic can operate. Keeping the voltage gain at 130dB is the best course of action. On the buffer amps, there are 2 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 5V.